Free Planning Tool
Drape Sizing Chart & Calculator
Enter the width and height you want to cover and we'll tell you how many panels to order in each fabric, and which length to pick.
Panels you'll need
20 ft wide × 10 ft high at 2× fullness needs 40 ft of fabric width.
- 5ShopVoile Sheer10 ft × 116 in panels.
- 5ShopCrinkle Taffeta10 ft × 97 in panels.
- 8ShopSpandex10 ft × 60 in panels.
- 8ShopCrushed Velvet10 ft × 60 in panels.
- 10ShopVelvet Curtains9 ft × 52 in panels. Our longest, but shorter than your 10 ft height.
Panel counts are rounded up to whole panels. Each fabric is an alternative: order the count shown for the one you choose.
Panels per 10 ft of width
A quick reference for a standard 10 ft pipe-and-drape section.
| Panel width | Flat (1×) | Light gather (1.5×) | Standard (2×) | Extra full (3×) |
|---|---|---|---|---|
| 116 inVoile Sheer | 2 | 2 | 3 | 4 |
| 97 inCrinkle Taffeta | 2 | 2 | 3 | 4 |
| 60 inSpandex, Crushed Velvet | 2 | 3 | 4 | 6 |
| 52 inVelvet Curtains | 3 | 4 | 5 | 7 |
How to measure for drapes
- Width. Measure the full span you want to cover: the length of your curtain rod, pipe-and-drape crossbar, or wall. For several sections, add them together.
- Height. Measure from the top of the rod or crossbar down to where the fabric should end. For a floor-length backdrop, that is the floor.
- Fullness. Decide how gathered the fabric should look. Fullness is how much fabric width you use compared to the width you cover.
What fullness means
A panel pulled flat covers its full width but shows no folds. Gathering it creates the pleated look most backdrops have, and uses more fabric. At 2× fullness, a 10 ft wide backdrop uses 20 ft of fabric width. Sheer fabrics usually need more fullness than opaque ones so the wall or stand behind them doesn't show through.
The formula
Panels = width to cover × fullness ÷ panel width, rounded up to the next whole panel. For example, a 20 ft (240 in) backdrop at 2× fullness needs 480 in of fabric. With 60 in wide panels, that is 480 ÷ 60 = 8 panels.
Choosing a length
Pick the panel length that matches your height, or the next size up. Extra length can pool on the floor for a softer look, or be gathered at the top. A panel shorter than your height will leave a gap at the bottom.
